-Ensure that the air valve pin is in the upright position before inflating. Also, verify that the hose is securely connected to the inflation port of the pump；

-For maximum efficiency, utilize the dual-action mode during the initial stages of inflation;

-The pressure gauge is sensitive and will indicate 1 PSI increments. The board will reach its full shape at this initial pressure;

-Once reaches approximately 7 PSI, switch to single-action mode for labor saving. Recommended pressure: 12-15 PSI.

-When falling off the board, the water flow and the natural force of the fall can push the board away from you;

-Always remember to attach the leash to the board and your ankle or wrist. It can be a lifesaver in case you fall off the board unexpectedly;

-The leash we provide is 10 feet long, constructed with a 7mm cord TPU line and SUS swivels on both ends. It is one of the best leashes on the market, offering superior strength, reliability, and comfort.

-Before turning the tension lever, ensure pull out the inner shaft first. Avoid overturning the tension lever as this can cause the tension mechanism to break;

-Ensure the correct orientation of the handle and blade. The design is ergonomic, so feel the difference in handling with various orientations;

- It's recommended that the paddle height is 4” to 6” higher than head;

- The fully assembled paddle is buoyant and can float for at least one hour. However, the single middle shaft is not buoyant

Product description

Key points to inflate the board

Key points to inflate the board

Key points to attach the leash

inflateble sup board

Key points to assemble the paddle

aplus content video

Visit the Store

Visit the Store

Visit the Store

Visit the Store

Visit the Store

Visit the Store

Visit the Store

Visit the Store

Visit the Store

Visit the Store

Visit the Store

Visit the Store

Visit the Store

Visit the Store

Visit the Store

From the brand